Introducing our NEW Uncaptured Guide Rod with a Tungsten extension for extra weight where you need it!
Our new Tungsten guide rod extensions are the perfect complement to the LWD guide rods for competition shooters!
- No guide rod cap, which means you get an uncaptured guide rod for free movement
- Especially made for competition shooting
- Easy installation
- Extra weight in the muzzle to reduce muzzle flip
- Can be customizable with any weight ISMI recoil spring
- Can be used in Gen4 with LWD-GR4Adapter
Weight Differences between Stainless Guide Rods VS Stainless Guide Rods with Tungsten Extensions
Stainless G17/22 Guide Rod vs Stainless Guide Rod (G17/22) w/Tungsten Long Extension (Fits G17/22)
0.544 oz 1.52 oz
Stainless G17/22 Guide Rod vs Stainless Guide Rod (G17/22) w/Tungsten Short Extension (Fits G34/35)
0.544 oz 1.18 oz
Stainless G20/21 Guide Rod vs Stainless Guide Rod (G20/21) w/Tungsten Extension (Fits G40)
0.544 oz 1.19 oz
*These weights do not include the springs
For Gen 1-3 Installation:
Insert the guide rod as a non-captured guide rod installation. Place slide onto frame in the locked back position. We recommend using Loctite at this time on the extension's threads. Thread the extension on the guide rod and allow Loctite to dry fully before shooting according to manufacturers instructions.
For Gen 4 Installation:
Place ISMI spring over the guide rod, compress the ISMI spring. Place the LWD-GR4Adapter
, then Loctite threads of guide rod extension and thread onto guide rod. Place in slide. Allow Loctite to dry completely according to manufactures instructions before shooting.