Lone Wolf "Slide Melt" Red Dot Sight Installation

SKU:
LWD-SLIDEMELT
$99.95 - $149.95
(11 reviews)

Current Stock:
Adding to cart… The item has been added
If you've always wanted your slide cut for a specific optic, Lone Wolf Arms makes the process easy!



Ordering is simple:

  • Choose type of slide:
  • Choose where you want it installed:
  • Choose which optic you are going to use:


General Notes:

  • If customer is using their own red dot optic, screws must be sent in with the red dot so we can ensure the holes are tapped to the proper screw. Also include the battery if you'd like us to install the optic here. This step is critical when choosing to do a slide melt for an optic that's not on the list. 
  • Optics that are new and not on the list have an extended lead time. See here for updated times.
  • If screws are not available, we offer replacement screws for Burris and Trijicon HERE
  • We cannot do cuts to Glock OEM slides with the MOS optic cuts.
  • Most optics mounting screws will result in a hole that protrudes into the extractor depressor plunger hole. Screw lengths are adjusted to compensate for this, but care must be taken to ensure you don't over Loctite screws resulting in dripping into the channel. 



Notes on specific optics:

 

  

 Optic Model  Hole Size Screw Notes
Shield RMS 6-48 LWD will include specific screws with slide melt
Holosun 507K 6-48 LWD will include specific screws with slide melt
JP JPoint 6-48 LWD will include specific screws with slide melt
Burris Fastfire 2 6-48 LWD will include our screws (as seen here) with slide melt
Burris Fastfire 3  6-48 LWD will include our screws (as seen here) with slide melt
Sight Mark Mini Shot M-Spec  6-48 LWD will include our screws (as seen here) with slide melt
L3 (Eotech) MRD-715 6-48 LWD will include our screws (as seen here) with slide melt
Vortex Viper 6-48 Use screws from Vortex
Vortex Venom 6-48 Use screws from Vortex
Doctor Sights 6-48 LWD will include our screws (as seen here) with slide melt
Leupold DeltaPoint 6-48 LWD will include our screws (as seen here) with slide melt
Nikon Spur 6-48 Use screws from Nikon
Truglo TruTec 6-48 Use screws from Truglo
Crimson Trace CTS-1250  6-48 Use screws from Crimson Trace
     
Trijicon RMR/SRO 6-32 LWD will include our screws (as seen here) with slide melt
Holosun 507C 6-32 Use screws from Holosun (right hand screw must be shortened by customer if not sent with optic)
Sig Romeo 1 6-32 LWD will include specific screws with slide melt (Do not use screws included by Sig)
Sig Romeo 3 6-32  
Advanced Delta 6-32  
Atibal AT-MRD 6-32  
Springfield HEX Dragonfly  6-32 LWD will include our screws with slide melt
     
Leupold Deltapoint PRO M4X0.7 Use screws from Leupold 
Sig Sauer ROMEO1 PRO  M4x0.7 Use screws from Sig Sauer
Bushnell First Strike 4-40 Use screws from Bushnell
Lucid Litl Mo  4-40 LWD will include specific screws with slide melt
Trijicon RMRcc  4-40 LWD will include specific screws with slide melt
Vortex Razor 8-32 LWD will include specific screws with slide melt (Do not use screws included by Vortex)
C-More RTS-2  8-32 Use screws from C-More (LWD will shorten the factory screws)
C-More STS2  8-32  

 

(11 reviews) Write a Review
  • 5
    Slide Melt for My Red Dot

    Posted by Steve on 7th Apr 2024

    I couldn’t ask for better. It is perfect and I just love it!! It was easy to follow up and speak to real people.

  • 5
    Slide melt and installation for red dot

    Posted by Al Hussain on 31st Jan 2024

    Perfect

  • 5
    3 slide melts and two slides Cerakoted

    Posted by Bob Bowers on 22nd Jun 2023

    I have had LW melt 3 slides total. My first project was G21 a few years ago. They cut the slide for a Trijicon RMR and coated the slide. The work was nothing short of perfect for a very fair price. In the last two years they did "race cuts" on my G43 and G43X slides. Again, both were PERFECT. The G43 slide was Cerakoted to match my 1st slide as part of a "bundle." The melt and the coating took 2 months, but returned PERFECT. Excellent job, guys!

  • 5
    Glock Red Dot Milling

    Posted by John DePaul on 21st Apr 2023

    Great service as this is really turned around in a week at a great price and fits the red dot with ever so slight interference fit so that there is absolutely no movement of the red dot on the slide when firing. Best Value for your Time and Money!!

  • 5
    Slide melt optic cut

    Posted by Mike H on 13th Mar 2023

    Had a Glock 19 Gen 5 cut for Holosun 407k. Turn around just under 2 weeks with a couple days snow delay with USPS. Dot fit like a glove, very happy!!

  • 1
    COSTLY AND BAD EXPERIENCE

    Posted by Manuel Martinez on 1st Mar 2023

    I sent them my slide with a brand new Holosun 507C X2. I mailed my package insured because I was sending $600+ value. When I got back the installation done, when I opened the package the first thing, I noticed was a scratch on the front lens. I immediately tried to contact them, but I got VM. I sent an email explaining because I did not want to let my problem get old. In response I got and email telling me that they inspect their deliveries and the optics were on perfect condition. In other words, I have to take the loss (Amazon $309 + Tax) HOLOSUN do not warranty both lenses and Lone Wolf do not insure the package. If you ever decide to let them do this work, make sure that you and they mail the parts insured. Additionally, send them pictures before you mail and demand pictures of the work before they mail. LONE WOLF lack of professional response is extremely disappointing. I still have not been able to talk with anybody there. I am done with LONE WOLF. Manuel Martinez HOUSTON, TEXAS All items are inspected before leaving our facility, things can happen in shipping that we have no control over. We are replacing the red dot for Mr. Martinez. These issues take time to straighten out and we have to be given the chance to do that. I apologize that this happened and we will take care of it.

  • 5
    Slide Melt

    Posted by Sarge on 20th Feb 2023

    Absolutely great work! Combat cut so when I add sights they will be perfect with the optic! Couldn't ask for better work and the price is right too!

  • 5
    Combat cut

    Posted by Cris on 30th Jan 2023

    Opted for the Combat Cut to fit Stealth Gear chest rig. Tight final fitting with short noticeable lead time for a busy murse. Finish reminds me of CNC machining which costs three times as much or more. Quicker sight pictures, solid fit for on the move draws and recoils less with chuck of slide removed. My thumb sends its regards.

  • 5
    Slide melt

    Posted by Rocky on 2nd Jan 2023

    Very happy with my slide melt. I have a Glock 27 and wanted it milled for a Holosun red dot that I already had. I also wanted the rear sight in front of the dot. They installed the new sight’s for free that I purchased from them and bore sighted the red dot with the new sights. They did everything I wanted and did a great job! It was a fast turnaround time. The customer service was outstanding. The only two things that I think could have been better is they could have blued the milled out section which they did not do. I know I can do that myself but would have been nice. The other thing is I wish they did other brand of pistols like FN. But I would highly recommend them and will use them again.

  • 5
    Red dot cut

    Posted by James on 27th Dec 2022

    Wow. I am super impressed. I had held off for a long time because I had read that turn around times were crazy long, but when the black Friday deal popped up, I figured I could suck it up and deal with not having a few of my slides for up to two months.....I got my slide back in a week, and it is the crispest most flawless machine work I've seen on such a thing. I am so excited to get my other slides back that I sent a bit after the first. I can't recommend lonewolf enough, I have had repeated good experiences with them, and it makes me wonder about the complainers is see on Reddit and such from time to time. How can their experiences be so wildly different than mine? 11/10